According to the experimenter to switch "on" the relay the circuit must have certain amount of voltage in order to switch "on" the relay the switching circuit is 0v when there is no power passing through control circuit. As i switched the ABS "on" after 200ms the switch closes and voltage pass through circuit switch. There was also voltage drop for 10v at 50ms and there increased to 13v, this happened due to pump self test switching "on" and then "off".
Hi Moheb. This is an example of where you often don't have enough explanations and detail. Or what you have is not accurate. The votages and times in the hand-drawn waveform are not clear. Overall, your blog is not showing enough description that shows understanding. Are you interested in upgrading the work to make it better? It would need to show lots of understanding and be clear and precise.
ReplyDelete